| Manufacturer | Code | Category | Category 2 | Comment |
| IKO | NR | design | | with stop ring on outer surface of outer ring |
| IKO | OH | design | | with oil hole in bearings ring |
| IKO | J | design | | no oil hole |
| INA | -A | design | | NUKR PWKR PWKRE-2RS with -A means: with hexagon socket and optimized profile. Hexagon socket used to have the abbreviation -SK, but they didn’t have an optimized profile. |
| INA | AS1 | design | | lubrication hole in outer ring |
| INA | IS1 | design | | lubrication hole in outer ring |
| INA | C3 | design | | radial bearing clearance larger than normal |
| INA | EGS | design | | inner ring with raceway machined without twisting (for contact seals) |
| INA | VGS | design | | inner ring raceway with machining allowance, the raceway is pre-ground. values for FVGS diameter |
| INA | G2 | design | | standard quality class of needle rollers |
| INA | SORT.. | design | | needle roller types for needle roller and cage assembly dimensions in m |
| INA | PE | design | | extended tolerances (only ZKFL/ZKLN) |
| INA | RR | design | | with Corrotect® coating |
| INA | SK | design | | hexagon socket for cam followers, intended to become standard and replace the slotted version. |
| INA | ZW | design | | radial needle roller and cage assembly, double-row |
| INA | .2AP | design | | axially paired bearing (only ZKFL/ZKLN) |
| INA | SM03 | greasing | | greased with KP2N-25 grease according to DIN 51825 for a temperature range of -30 °C to +150 °C. |
| INA | SM11 | greasing | | greased with K2E-25 grease according to DIN 51825 for a temperature range of -40 °C to +150 °C. |
| IKO | Z | seal | | with dust cover on one side |
| IKO | ZZ | seal | | with dust cover on both sides |
| IKO | U | seal | | with seal on one side |
| IKO | UU | seal | | with seal on both sides |
| IKO | 2RS | seal | | with seals on both sides |
| INA | RS | seal | | lip seal on one side of the bearing |
| INA | .2RS | seal | | lip seal on both sides of the bearing |
| INA | PP | seal | | lip seal on both sides of the bearing |
| INA | .2Z | seal | | cover plate (gap seal) on both sides of the bearing |
| INA | FPM | material | seal | sealing rings made of fluorinated rubber |
| INA | A B C | various | | the meaning of the symbol has not been defined in detail. Depending on the requirements, they are used to indicate special features of the internal design or external shape. In general, their use is limited in time to avoid confusion during a transitional period. However, in some cases they are also used to permanently label bearings and parts of the same type as well as the outer dimensions of different internal constructions. |
| INA | X | various | | bearings and accessories whose outer dimensions were changed due to adaptations to international standards. The X symbol is only used during a transitional period. X is also used for cylindrical outer ring raceways in cam followers and support rollers. |
| IKO | N | cage | | made of synthetic resin |
| IKO | V | cage | | no cage or full complement |
| IKO | C2 | bearing clearance | | lower clearance than normal |
| IKO | (none) | bearing clearance | | normal clearance |
| IKO | C3 | bearing clearance | | higher clearance than normal |
| IKO | C4 | bearing clearance | | higher clearance than C3 |
| IKO | C5 | bearing clearance | | higher clearance than C4 |
| IKO | C2NA | bearing clearance | | lower clearance than normal |
| IKO | NA | bearing clearance | | normal clearance |
| IKO | C3NA | bearing clearance | | higher clearance than normal |
| IKO | C4NA | bearing clearance | | higher clearance than C3 |
| IKO | C5NA | bearing clearance | | higher clearance than C4 |
| IKO | T1 | bearing clearance | | special radial clearance |
| IKO | C1 | bearing clearance | | special radial clearance |
| IKO | C2 | bearing clearance | | special radial clearance |
| IKO | (none) | tolerance | | JIS Class 0 |
| IKO | P6 | tolerance | | JIS Class 6 |
| IKO | P5 | tolerance | | JIS Class 5 |
| IKO | P4 | tolerance | | JIS Class 4 |
| IKO | P | tolerance | | IKO accuracy class: precision class |
| INA | P5 | tolerance | | tolerance class: bearing with particularly high dimensional tolerance |
| IKO | C | material | | cemented steel for outer ring |
| IKO | F | material | | stainless steel for bearing and rolling elements |
| ABEG | -2 | tolerance | | needle sorting -0-2 |
| ABEG | -6 | tolerance | | needle sorting -2-4 |
| ABEG | -10 | tolerance | | needle sorting -4-6 |
| ABEG | -14 | tolerance | | needle sorting -6-8 |
| ABEG | 1/4"-12UHR-D1 | design | | 1/4 inch lubrication hole, centered (at 12 o’clock) |
| ABEG | 1/4"-D1 | design | | 1/4 inch lubrication hole |
| ABEG | 1/8''-D1 | design | | 1/8 inch lubrication hole |
| ABEG | 1/8''-M1 | design | | 1/8 inch lubrication hole, burnished |
| ABEG | 1/8-27 NPT-D1-L3 | design | | 1/8-27 NPT thread, can be relubricated, 3-lip seal |
| ABEG | 1/8-27 NPT-D1-L3-90° | design | | 1/8-27 NPT thread, can be relubricated, 3-lip seal |
| ABEG | 10%-EP2 | lubricant | | Shell Alvania EP2 10% reduced lubrication |
| ABEG | 10%-GLY501 | lubricant | | 10% reduced lubrication, Polylub GLY501 grease |
| ABEG | 10%-SRL | lubricant | | Multemp SRL 10% reduced lubrication |
| ABEG | 101,6MM-D1 | design | | 101.6 mm hole spacing, can be relubricated |
| ABEG | 101MM-D1 | design | | 101 mm hole spacing, can be relubricated |
| ABEG | 101MM-M14-D1 | design | | 101 mm hole spacing, M14 (deviating hole) |
| ABEG | 101MM-M16-D1 | design | | 101.6 mm hole spacing, M16 thread, can be relubricated |
| ABEG | 101MM-M16-M1 | design | | 101 mm hole spacing, M16 thread, burnished |
| ABEG | 101MM-M16-OS | design | | 101 mm hole spacing, M16 thread without lubrication |
| ABEG | 10MM-D1 | design | | 10 mm hole spacing, can be relubricated |
| ABEG | 10MM-M1 | design | | 10 mm hole spacing, can be relubricated, burnished |
| ABEG | 10MM-OS | design | | 10 mm hole, without lubrication hole |
| ABEG | 11,5MM-D1 | design | | 11.5 mm hole, with lubrication hole |
| ABEG | 11,5MM-D2-L3 | design | | 11.5 mm hole with two lubrication holes, L3 seal |
| ABEG | 11,5MM-OS | design | | 11.5 mm hole, without lubrication hole |
| ABEG | 114MM-D1 | design | | 114 mm hole spacing, can be relubricated |
| ABEG | 114MM-M16-D1 | design | | 114 mm hole spacing, M16 thread, can be relubricated |
| ABEG | 11MM-D1 | design | | 11 mm hole spacing, can be relubricated |
| ABEG | 11MM-M1 | design | | 11 mm hole spacing, can be relubricated, burnished |
| ABEG | 11MM-OS | design | | 11 mm hole spacing, cannot be relubricated |
| ABEG | 12%-TTM-1502 | design | | 12% reduced lubrication, Turmotemp M 1502 grease |
| ABEG | 12,5MM-D1 | design | | 12.5 mm hole, can be relubricated |
| ABEG | 12,5MM-OS | design | | 12.5 mm hole, cannot be relubricated |
| ABEG | 12. Dez | design | | 12 hole inner ring/12 hole outer ring |
| ABEG | 12MM-D1 | design | | 12 mm hole, can be relubricated |
| ABEG | 12MM-OS | design | | 12 mm hole, cannot be relubricated |
| ABEG | 13,5MM-D1 | design | | 13.5 mm hole, can be relubricated |
| ABEG | 13,5MM-M1 | design | | 13.5 mm hole, can be relubricated, burnished |
| ABEG | 13,5MM-OS | design | | 13.5 mm hole, cannot be relubricated |
| ABEG | 13MM-OS | design | | 13 mm hole, cannot be relubricated |
| ABEG | 14MM-D1 | design | | 14 mm hole, can be relubricated |
| ABEG | 14MM-OS | design | | 14 mm hole, cannot be relubricated |
| ABEG | 14MMD1 | design | | 14 mm hole, can be relubricated |
| ABEG | 15%GLY501 | lubricant | | 15% reduced lubrication, Polylub GLY501 grease |
| ABEG | 15%-SRL | lubricant | | reduced lubrication, Multemp. SRL 15% |
| ABEG | 15-20%-BQ-72-72 | lubricant | | reduced lubrication, Klüberquiet BQ 72 72 |
| ABEG | 15MM-D1 | design | | 15 mm hole, can be relubricated |
| ABEG | 18MM-D1 | design | | changed width, can be relubricated |
| ABEG | 1AS | design | accessories | incl. 1 AS washer |
| ABEG | 20% | lubricant | | 20% reduced lubrication |
| ABEG | 20%-325 | lubricant | | reduced lubrication 20%, Exxon Mobil Beacon 325 cold grease |
| ABEG | 20%-CMM-SRL | lubricant | | reduced lubrication, noise-tested, Kyodo Yushi SRL 20% |
| ABEG | 20%-EP2 | lubricant | | Shell Alvania EP2 20% reduced lubrication |
| ABEG | 20%-HTHS | lubricant | | reduced lubrication with 20%, Great Wall HTHS cold grease |
| ABEG | 20%-PS2 | lubricant | | reduced lubrication with 20%, Kyodo Yushi PS2 cold grease |
| ABEG | 20%-RLQ2 | lubricant | | Shell Alvania RLQ2 20% reduced lubrication |
| ABEG | 20%-SF | lubricant | | special grease reduced lubrication |
| ABEG | 20%-SRL | lubricant | | Kyodo Yushi SRL 20% reduced lubrication |
| ABEG | 20%-SUPER N | lubricant | | Raremax Super N reduced lubrication |
| ABEG | 20/24 | design | slewing ring | 20 hole inner ring/24 hole outer ring |
| ABEG | 2AP | design | | paired design |
| ABEG | 2AS | design | accessories | incl. 2 AS washers |
| ABEG | 2NKE | seal | | non-contact seal |
| ABEG | 2NKE-DL-5 | seal | coating | Dicronite coating, non-contact seal |
| ABEG | 2NSE | seal | | double lip seal on both sides |
| ABEG | 2NSL | seal | | double lip seal on both sides |
| ABEG | 2RT | seal | | closer fitting seal |
| ABEG | 2RT-15-20%-BQH72-102 | seal | lubricant | closer fitting seal, reduced lubrication, SF |
| ABEG | 2RT-15-20%-HQ72-102 | seal | lubricant | closer fitting seal, reduced lubrication, SF |
| ABEG | 2RT-CMM | seal | design | closer fitting seal, noise-tested |
| ABEG | 2RU | seal | | non-contact seal |
| ABEG | 2RU-15-20%-SRL | seal | lubricant | non-contact on both sides seal, reduced lubrication, SRL |
| ABEG | 2RU-20%-SRL | seal | lubricant | non-contact on both sides seal, reduced lubrication, SRL |
| ABEG | 2RU-CMM | seal | design | non-contact seal, noise-tested |
| ABEG | 2RZ | seal | | non-contact seal on both sides |
| ABEG | 2RZ-15-20%-BQH72-102 | seal | lubricant | non-contact seal on both sides, reduced lubrication, SF |
| ABEG | 2RZ-15-20%-SF | seal | lubricant | non-contact seal on both sides, reduced lubrication, SF |
| ABEG | 2RZ-20%-SRL | seal | lubricant | non-contact seal on both sides, reduced lubrication, SRL |
| ABEG | 2RZ-CMM | seal | design | non-contact on both sides seal, noise-tested |
| ABEG | 2RZ-PS2 | seal | lubricant | non-contact seal on both sides,Kyodo Yushi PS2 |
| ABEG | 2RZ-SRL | seal | lubricant | non-contact seal on both sides, SRL grease |
| ABEG | 2SK | design | | hexagon socket, with lubrication hole on both sides |
| ABEG | 2TS | material | seal | Teflon seal on both sides |
| ABEG | 2ZL | seal | | cover plates with lamellar ring on both sides |
| ABEG | 30%-SRL | | | Multemp SRL 30% reduced lubrication |
| ABEG | 47MM-M10-D1 | design | | 47 mm hole spacing, M10 thread, can be relubricated |
| ABEG | 47MM-M8-D1 | design | | 47 mm hole spacing, M8 thread, can be relubricated |
| ABEG | 47MM-M8-M1 | design | | 47 mm hole spacing, M8 thread, burnished/can be relubricated |
| ABEG | 49MM-M8-D1 | design | | 49 mm hole spacing, M8 thread, can be relubricated |
| ABEG | 4MM | design | | width 4 mm |
| ABEG | 50%-KM192 | lubricant | | Klüber Barietta KM192 |
| ABEG | 50,8MM-M10-D1 | design | | 50.8 mm hole spacing, M10 thread, can be relubricated |
| ABEG | 50,8MM-M10-M1 | design | | 50.8 mm hole spacing, M10 thread, burnished/can be relubricated |
| ABEG | 50,8MM-M10-OS | design | | 50.8 mm hole spacing, M10 thread, cannot be relubricated |
| ABEG | 50,8MM-M8-D1 | design | | 50.8 mm hole spacing, M8 thread, can be relubricated |
| ABEG | 50,8MM-M8-M1 | design | | 50.8 mm hole spacing, M8 thread, can be relubricated + burnished |
| ABEG | 50,8MM-M8-OS | design | | 50.8 mm hole spacing, M8 thread, cannot be relubricated |
| ABEG | 50,8MM-OS | design | | 50.8 mm hole spacing, cannot be relubricated |
| ABEG | 52MM-M10-D1 | design | | 52 mm hole spacing, M10 thread, can be relubricated |
| ABEG | 56MM-M10-D1 | design | | 56 mm hole spacing, M10 thread, can be relubricated |
| ABEG | 56MM-M10-M1 | design | | 56 mm hole spacing, M10 thread, can be relubricated + burnished |
| ABEG | 5MM | design | | width 5 mm |
| ABEG | 60%-EP2-LLU-ZNNI | lubricant | | 60% Shell Alvania EP2+2-lip seal on both sides+ZNNI |
| ABEG | 66MM-M14-D1 | design | | 66 mm hole spacing, M14 thread, can be relubricated |
| ABEG | 66MM-OS | design | | 66 mm hole spacing, without lubrication hole |
| ABEG | 6MM | design | | width 6 mm |
| ABEG | 76MM-M10-D1 | design | | 76 mm hole spacing, M10 thread, can be relubricated |
| ABEG | 76MM-M10-D2 | design | | 76 mm hole spacing, M10 thread, with 2 lubrication holes |
| ABEG | 76MM-M10-M1 | design | | 76 mm hole spacing, M10 thread, can be relubricated, burnished |
| ABEG | 76MM-M14-D1 | design | | 76.2 mm hole spacing, M14, can be relubricated |
| ABEG | 77MM-D1 | design | | 77 mm hole spacing, can be relubricated |
| ABEG | 7MM | design | | width 7 mm |
| ABEG | 7MM-D1 | design | | 7 mm hole, can be relubricated |
| ABEG | 7MM-M1 | design | | 7 mm hole, can be relubricated, burnished, ball pressure screw |
| ABEG | 7MM-OS | design | | 7 mm hole, greased for life |
| ABEG | 80-100%-GHY133 | lubricant | | Klueber GHY 133 (80-100%) grease |
| ABEG | 80MM-M14-D1 | design | | 80 mm hole spacing, M14 thread, can be relubricated |
| ABEG | 83MM-M10-D1 | design | | 82.6 mm hole spacing, can be relubricated |
| ABEG | 83MM-M10-M1 | design | | 83 mm hole spacing, M10 thread, burnished |
| ABEG | 83MM-M14-D1 | design | | 82.6 mm hole spacing, can be relubricated |
| ABEG | 84MM-M14-D1 | design | | 84 mm hole spacing, M14 thread, can be relubricated |
| ABEG | 89MM-M12-D1 | design | | 89 mm hole spacing, M12 thread, can be relubricated |
| ABEG | 89MM-M14-D1 | design | | 89 mm hole spacing, M14 thread, can be relubricated |
| ABEG | 89MM-M14-M1 | design | | 89 mm hole spacing, M14 thread, burnished |
| ABEG | 8MM-D1 | design | | 8 mm hole spacing, can be relubricated |
| ABEG | 9,5MM-D1 | design | | 9.5 mm hole, can be relubricated |
| ABEG | 9,5MM-OS | design | | 9.5 mm hole, without lubrication hole |
| ABEG | 90MM-M14-D1 | design | | 90 mm hole spacing, M14 thread, can be relubricated |
| ABEG | 94MM-M16-D1 | design | | 94 mm hole spacing, M16 thread, can be relubricated |
| ABEG | 95MM-M12-D1 | design | | 95 mm hole spacing, M12 hole, can be relubricated |
| ABEG | 95MM-M14-D1 | design | | 95 mm hole spacing, M14 hole, can be relubricated |
| ABEG | 9MM-D1 | design | | 9 mm hole, can be relubricated |
| ABEG | 9MM-M1 | design | | 9 mm hole, can be relubricated + burnished |
| ABEG | 9MM-OS | design | | 9 mm hole, cannot be relubricated |
| ABEG | A | design | | changed internal design according to ISO/DIN |
| ABEG | A-1,80MM | design | | 1.80 mm inner ring protruding on one side |
| ABEG | A-KU | cage | | changed internal construction according to DIN/ISO+KU cage |
| ABEG | A-ST | cage | | changed internal construction according to DIN/ISO+ST cage |
| ABEG | A2 | design | | changed design |
| ABEG | A2-OS | design | | changed design + without lubrication groove |
| ABEG | AA-1MM | design | | 1 mm inner ring protruding on both sides |
| ABEG | AA-2MM | design | | 2 mm inner ring protruding on both sides |
| ABEG | ABEC3 | tolerance | | tolerances according to ABEC3 |
| ABEG | ABEC5 | tolerance | | tolerances according to ABEC5 |
| ABEG | ABEC7 | tolerance | | tolerances according to ABEC7 |
| ABEG | AD | design | | deviating outer diameter |
| ABEG | AD-EU | design | | adev. outer diameter, flanged on one side |
| ABEG | AISI440 | design | | AISI440 stainless steel |
| ABEG | AISI440-20%SUPERN | material | lubricant | AISI440 stainless steel, 20% Raremax Super N |
| ABEG | AISI440-BLACK | material | | AISI440 with black seal |
| ABEG | AISI440-LT2 | material | lubricant | AISI440, Multemp LT No. 2 |
| ABEG | ALU | material | | aluminum cage |
| ABEG | AR2.1MM | design | | (D-Da)/2 >=2.1m, OR reinforced. |
| ABEG | AS-M-SP | design | | changed internal design, lubrication hole in OR, brass cage, SP to |
| ABEG | AS1 | design | | with lubrication hole |
| ABEG | AS7 | lubricant | | MILG-23827B Aeroshell Grease7 |
| ABEG | ASR1 | design | | lubrication groove and lubrication hole in outer ring |
| ABEG | AV2 | lubricant | | Alvania #2 grease |
| ABEG | B | design | | contact angle B |
| ABEG | BEM-34-132 | lubricant | | Klüberplex BEM 34-132 |
| ABEG | BEP | cage | | SKF reinforced plastic cage |
| ABEG | BM1-UP | cage | | brass cage and with high precision |
| ABEG | BQ-72-102 | lubricant | | Klüberquiet BQ72-102 |
| ABEG | BQ-72-72 | lubricant | | Klüberquiet BQ72-72 |
| ABEG | BQH-72-102 | lubricant | | Klüberquiet BQH 72-102 |
| ABEG | C4 | bearing clearance | | bearing clearance C4 |
| ABEG | CARBON | material | | carbon steel |
| ABEG | CM | design | | noise-tested |
| ABEG | CMM | design | | 100% noise-tested + CM bearing clearance + P6 |
| ABEG | CMM-20% | design | lubricant | 100% noise-tested + CM bearing clearance + P6, 20% SRL |
| ABEG | CMM-A | design | | noise-tested, special design |
| ABEG | CMM-AV2 | design | lubricant | noise-tested, Alvania #2 grease |
| ABEG | CMM-EP2 | design | lubricant | Shell Alvania EP2, noise-tested |
| ABEG | CMM-LDS | design | lubricant | noise-tested, Isoflex LDS 18 Special A grease |
| ABEG | CMM-P6 | design | tolerance | noise-tested, tolerance P6 |
| ABEG | CMM-PD2 | design | lubricant | noise-tested, PD2 long-life grease |
| ABEG | CMM-PS2 | design | lubricant | noise-tested, Kyodo Yushi PS2 grease |
| ABEG | CMM-SRL | design | lubricant | noise-tested, Multemp SRL grease |
| ABEG | CMM-SUPERN | design | lubricant | noise-tested, Kyodo Yushi Raremax SuperN grease |
| ABEG | CMMG9 | design | lubricant | noise-tested, Isoflex 18A grease |
| ABEG | CMMKF | design | lubricant | noise-tested, cold grease |
| ABEG | CMQ | design | | very low noise |
| ABEG | CP2DL | lubricant | | Klüber Centoplex 2D |
| ABEG | D | seal | | sealed on one side and guided in groove |
| ABEG | D-CMM | seal | design | sealed on one side, noise-tested |
| ABEG | D-M | seal | | sealed on one side, motor quality |
| ABEG | D1 | seal | | can be relubricated |
| ABEG | D1-A | design | | can be relubricated, special design |
| ABEG | D1-GJS-400-15 | material | design | can be relubricated, spheroidal cast iron (GGG40) |
| ABEG | D1-GJS-450-10 | material | design | can be relubricated, spheroidal cast iron (GGG) |
| ABEG | D1-HT | material | design | can be relubricated, with high-temperature grease |
| ABEG | D1-K2 | design | | high-temperature grease for housing bearings (contains silicone) |
| ABEG | D1-L2 | design | | can be relubricated + 2-lip seal |
| ABEG | D1-L3 | design | | can be relubricated + 3-lip seal |
| ABEG | D1-L3-ZNNI | design | coating | can be relubricated + 3-lip seal + zinc/nickel coating |
| ABEG | D1-OB | design | | can be relubricated, without base paint |
| ABEG | D1-S | design | | can be relubricated, for stainless steel caps |
| ABEG | D1-WE | design | | not valid (can be relubricated, self-aligning) |
| ABEG | D1-ZK | design | coating | can be relubricated, galvanized insert (complete) |
| ABEG | D1270 | design | | can be relubricated, pedestal oversize 270 mm |
| ABEG | D2 | design | | lubrication hole at front and rear of outer ring |
| ABEG | D2-K2 | design | lubricant | cold grease (SH33M) housing bearings (contains silicone) |
| ABEG | D2-L3 | design | seal | with two lubrication holes, L3 seal |
| ABEG | DC-Q5 | lubricant | | greased with Dow Corning, Q5-7348 |
| ABEG | DCMQ | seal | design | sealed on one side, very low noise |
| ABEG | DD | seal | | sealed on both sides and guided in groove |
| ABEG | DD-15-20%-BQH72-102 | seal | lubricant | seal guided in groove, 15-20%-BQH72-102 |
| ABEG | DD-20%-SRL | seal | lubricant | seal guided in groove, 20% Multemp SRL grease |
| ABEG | DD-60% | seal | lubricant | seal guided in groove, 60% grease |
| ABEG | DD-70% | seal | lubricant | seal guided in groove, 70% grease |
| ABEG | DD-EP2 | seal | lubricant | seal guided in groove, Shell Alvania EP2 grease |
| ABEG | DD-KU | seal | cage | seal guided in groove, plastic cage |
| ABEG | DD-M | seal | design | motor quality |
| ABEG | DD-P6-20%-SRL | seal | tolerance | seal guided in groove, P6, 20% Multemp SRL grease |
| ABEG | DD-RLQ2 | seal | lubricant | seal guided in groove, Alvania RLQ2 grease |
| ABEG | DD-SRL | seal | lubricant | seal guided in groove, Multemp SRL grease |
| ABEG | DDCMM | seal | design | noise-tested, seal in groove |
| ABEG | DDCMM-20% | seal | design | noise-tested, seal in groove, 20% SRL |
| ABEG | DDCMQ | seal | design | sealed on both sides, very low noise |
| ABEG | DDU | seal | | double lip seal on both sides |
| ABEG | DL-5 | coating | | Dicronite DL-5 coating for dry operation |
| ABEG | DU | seal | | double-lip seal on one side |
| ABEG | DZ | design | | cylindrical outer ring |
| ABEG | E | design | | reinforced design |
| ABEG | E-D1 | design | | reinforced base, can be relubricated |
| ABEG | E-KU | design | cage | reinforced plastic cage |
| ABEG | E-KU-W33 | design | cage | reinforced plastic cage |
| ABEG | E-M | design | cage | reinforced brass cage |
| ABEG | E-M-W33 | design | cage | reinforced design, roller-guided, can be relubricated |
| ABEG | E-MAS | design | cage | reinforced brass cage guided on outer ring, lubrication groove |
| ABEG | E-MB | design | cage | reinforced brass cage |
| ABEG | E-MB-A | design | cage | reinforced brass cage + deviating width |
| ABEG | E-MB-W33 | design | cage | reinforced design, can be relubricated |
| ABEG | E-ST | design | cage | reinforced steel cage |
| ABEG | E-ST-S0 | design | cage | reinforced steel cage, dimensionally stabilized up to +150 °C |
| ABEG | E-ST-W33 | design | cage | reinforced, steel cage, can be relubricated |
| ABEG | E-TNG | design | cage | reinforced plastic cage |
| ABEG | E-TVP2 | design | cage | FAG reinforced plastic cage |
| ABEG | E-TVPB | design | cage | FAG reinforced plastic cage |
| ABEG | E-TVPBW33 | design | cage | reinforced plastic cage |
| ABEG | E-W33 | design | cage | reinforced design, can be relubricated |
| ABEG | E01 | design | | special design without lubrication hole and groove |
| ABEG | E1 | design | | with groove and lubrication hole |
| ABEG | ECJ | design | | SKF reinforced steel cage |
| ABEG | ECP | design | | SKF reinforced polyamide cage |
| ABEG | EGS | design | | (plunge-) ground without twisting |
| ABEG | EMQ | design | | electric motor quality |
| ABEG | EMQ-SRL | design | lubricant | electric motor quality, Multitemp SRL |
| ABEG | EN-OS | design | | eccentric insert, without lubrication hole |
| ABEG | EN-SF | design | lubricant | Kyodo Yushi Multemp PS2 |
| ABEG | EP | lubricant | | SKF glass fiber reinforced plastic cage |
| ABEG | EP2 | lubricant | | Shell Alvania EP2, now Gadus S2 V220 2 |
| ABEG | ET-P | lubricant | | Kyodo Yushi Multemp ET-P |
| ABEG | ETN9 | design | cage | plastic cage (solid snap-type cage) |
| ABEG | EU | design | | flanged on one side |
| ABEG | FKM-AISI440-FOOD | material | seal | seal made of FKM, food-grade grease |
| ABEG | FKM/FPM | material | seal | fluorinated elastomer, high temperatures up to 200 °C |
| ABEG | FOOD | lubricant | | food-grade grease |
| ABEG | FOOD-D1 | lubricant | | food-grade grease, can be relubricated |
| ABEG | G | design | | curved nose |
| ABEG | G2 | tolerance | | needle sorting G2 |
| ABEG | G3 | tolerance | | needle sorting G3 |
| ABEG | G4 | tolerance | | needle sorting G4 |
| ABEG | G5 | tolerance | | needle sorting G5 |
| ABEG | GHY133 | lubricant | | Klueber GHY 133 -25~150°C grease |
| ABEG | GHY72 | lubricant | | Klueber GHY 72 -40~180°C grease |
| ABEG | GLY32 | lubricant | | Klueber Asonic GLY 32 grease |
| ABEG | GN | design | | threaded nipple |
| ABEG | GS2V100Q2 | lubricant | | Shell Gadus S2V100Q2 grease, formerly RLQ2 |
| ABEG | GW-TB | lubricant | | grease: Sinopec Taibo |
| ABEG | HDC2 | lubricant | | greased with Lubcon Turmogrease HDC2 |
| ABEG | HG | design | | oil channel for hydraulic adapter sleeve |
| ABEG | HLPF2 | lubricant | | Aralup HLPF2 grease |
| ABEG | HP | design | | rail precision, highly precise |
| ABEG | HP-1 | design | | highly precise, low pre-tensioning |
| ABEG | HP-2 | design | | highly precise, medium pre-tensioning |
| ABEG | HP-3 | design | | highly precise, high pre-tensioning |
| ABEG | HQ72-102 | lubricant | | Asonic HQ72-102 -40~180°C |
| ABEG | HT | lubricant | | temperature resistant up to 150 °C/not in the case of 2RS |
| ABEG | HT-20% | design | | high-temperature grease reduced lubrication |
| ABEG | HT200 | design | | temperature resistant up to 200 °C |
| ABEG | HT250 | design | | temperature resistant up to 250 °C |
| ABEG | HT260 | design | | temperature resistant up to 260 °C |
| ABEG | HT270 | design | | temperature resistant up to 270 °C |
| ABEG | HT280 | design | | temperature resistant up to 280 °C |
| ABEG | HT300 | design | | temperature resistant up to 300 °C |
| ABEG | HT320 | design | | temperature resistant up to 320 °C |
| ABEG | HT330 | design | | temperature resistant up to 330 °C |
| ABEG | HT350 | design | | temperature resistant up to 350 °C |
| ABEG | HT350GR | design | | temperature resistant up to 350 °C, graphite lubrication |
| ABEG | HT400 | design | | temperature resistant up to 400 °C |
| ABEG | HT450 | design | | temperature resistant up to 450 °C |
| ABEG | IR1,8MM | design | | inner ring worked to 1.8 mm (reinforced) |
| ABEG | IR15 | design | | inner ring elongated to 15 mm |
| ABEG | IR17 | design | | inner ring elongated to 17 mm |
| ABEG | IR2MM | design | | inner ring worked to 2 mm (reinforced) |
| ABEG | IS1 | design | | lubrication hole in inner ring |
| ABEG | J | design | | changed internal design |
| ABEG | J2 | design | | changed internal design |
| ABEG | J2-QCL7A | design | | SKF restricted tolerances -old- |
| ABEG | J2-QCL7C | design | | SKF restricted tolerances -new- |
| ABEG | JA | tolerance | | changed internal design |
| ABEG | JGB | design | | changed internal design |
| ABEG | K37 | lubricant | | Multitemp K37 grease |
| ABEG | KF | lubricant | | cold grease |
| ABEG | KFR | design | | plastic spring with knurl |
| ABEG | KR240 | lubricant | | Dupont Krytox 240 grease |
| ABEG | KU | cage | | plastic cage |
| ABEG | KU-25%-NCA52 | cage | lubricant | plastic cage, 25% grease quantity, Isoflex NCA52 grease |
| ABEG | KU-25%-SF | cage | lubricant | plastic cage, 25% grease quantity, special grease |
| ABEG | KU-80%-BEM34-132 | cage | lubricant | plastic cage, Klueber BEM34-132 (80%) grease |
| ABEG | KU-80-100%-GHY133 | cage | lubricant | plastic cage, Klueber GHY 133 (80-100%) grease |
| ABEG | KU-BLACK | design | | black plastic cover |
| ABEG | KU-CMM | cage | design | plastic cage + noise-tested |
| ABEG | KU-E | cage | design | plastic cage, reinforced |
| ABEG | KU-EP2 | cage | lubricant | plastic cage, formerly Shell AlvaniaEP2, now Gadus S2 V220 2 |
| ABEG | KU-EW33 | cage | design | reinforced plastic cage, can be relubricated |
| ABEG | KU-K37 | cage | lubricant | plastic cage, Multitemp K37 grease |
| ABEG | KU-LDS | cage | lubricant | plastic cage, Isoflex LDS 18 Special A grease |
| ABEG | KU-LDS-CMM | cage | lubricant | plastic cage, Isoflex LDS 18 A grease, noise-tested |
| ABEG | KU-P5 | cage | tolerance | plastic cage, tolerance class P5 |
| ABEG | KU-SA | cage | design | plastic cage, special design |
| ABEG | KU-SRL | cage | lubricant | plastic cage, Multitemp SRL grease |
| ABEG | KU-SRL-CMM | cage | lubricant | plastic cage, Multitemp SRL grease, noise-tested |
| ABEG | KU-W33 | cage | | plastic cage, can be relubricated |
| ABEG | L152 | lubricant | | Klüber Isoflex Topas L152 grease |
| ABEG | L6 | design | | 6-lip seal, inserts, housing bearing |
| ABEG | LB | seal | | non-contact seal on one side |
| ABEG | LB-GHY72-15% | seal | lubricant | non-contact seal one side, GHY72 15% grease |
| ABEG | LB-SRI-15% | seal | lubricant | non-contact seal one side, SRI 15% grease |
| ABEG | LBLU-SBM | seal | lubricant | one seal LU, the other LB with SB-M grease |
| ABEG | LDS | lubricant | | Isoflex LDS 18 Special A (cold grease) |
| ABEG | LHA | seal | | 2RS seal for temperatures up to 150°C |
| ABEG | LLB | seal | | non-contact seal on both sides |
| ABEG | LLB-10% | seal | lubricant | non-contact seal on both sides + 10% reduced lubrication |
| ABEG | LLB-10%-AV2 | seal | lubricant | non-contact seal both sides, 10% reduced lubrication + AV2 grease |
| ABEG | LLB-15% | seal | lubricant | non-contact seal on both sides + 15% reduced lubrication |
| ABEG | LLB-15%-SRL | seal | lubricant | non-contact seal on both sides + 15% reduced lubrication |
| ABEG | LLB-15-20%-SRL | seal | lubricant | non-contact on both sides seal, reduced lubrication, SRL |
| ABEG | LLB-20% | seal | lubricant | non-contact on both sides seal, 15% reduced lubrication |
| ABEG | LLB-20%-SRL | seal | lubricant | non-contact on both sides seal, 20% reduced lubrication, SRL |
| ABEG | LLB-35%-SRL | seal | lubricant | non-contact on both sides seal, 35% reduced lubrication, SRL |
| ABEG | LLB-A | seal | | non-contact on both sides seal, special design |
| ABEG | LLB-AISI440-40%FM222 | seal | lubricant | non-contact on both sides seal, AISI440, 40% FM222 |
| ABEG | LLB-BMQ72-162 | seal | lubricant | non-contact on both sides seal, BMQ72-162 grease |
| ABEG | LLB-BQH72-102 | seal | lubricant | non-contact on both sides seal, BMQ72-102 grease |
| ABEG | LLB-CMM | seal | | non-contact on both sides seal, noise-tested |
| ABEG | LLB-FKM-AISI440-SRL | seal | lubricant | non-contact seal made of FKM, MultempSRL grease |
| ABEG | LLB-HQ72-10 | seal | lubricant | non-contact on both sides seal, HQ 72-102 grease |
| ABEG | LLB-SRL | seal | lubricant | non-contact seal on both sides, SRL grease |
| ABEG | LLU | seal | | double lip seal on both sides |
| ABEG | LLU-50%-GS S2V100-3 | seal | lubricant | double lip seal on both sides, 50% GadusS2V100-3 |
| ABEG | LLU-50%-WHS2002 | seal | lubricant | double lip seal on both sides, 50% Fuchs WHS2002 |
| ABEG | LLU-SRI | seal | lubricant | double lip seal on both sides + SRI Shevron grease |
| ABEG | LLU-SRL | seal | lubricant | double lip seal on both sides + Multemp SRL |
| ABEG | LS1502 | lubricant | | Lubcon Turmotemp LS1502 |
| ABEG | LS1502-OS | lubricant | | Lubcon Turmotemp LS1502, without lubrication hole\ |
| ABEG | LU | Dichtung | | double-lip seal on one side |
| ABEG | LU-SRI-15% | seal | lubricant | double-lip seal on one side, SRI 15% grease |
| ABEG | M | design | | motor quality, centered solid cage from Zyrola |
| ABEG | M-HT | design | lubricant | motor quality, high temperature grease |
| ABEG | M-KF | design | lubricant | motor quality, cold grease |
| ABEG | M-SRL | design | lubricant | motor quality, Multemp SRL grease |
| ABEG | M1 | design | | burnished, can be relubricated |
| ABEG | M1-20%-SUPER N | design | lubricant | burnished, 20% Raremax Super N |
| ABEG | M1-A | design | | burnished w/ 1 lubrication hole in the middle 90° |
| ABEG | M1-N-RAL9006 | design | coating | burnished, wet paint according to RAL 9006 (alu) |
| ABEG | M1-N-RAL9010 | design | coating | burnished, wet paint according to RAL 9010 (white) |
| ABEG | M1-OS | design | | burnished, greased for life |
| ABEG | M1-P-RAL9006 | design | coating | burnished, powder paint according to RAL 9010 (white) |
| ABEG | M10X1-D1-L3 | design | | M10x1 thread, can be relubricated, 3-lip seal |
| ABEG | M10X1-D1-L3-270° | design | | M10x1 thread, can be relubricated, 3-lip seal, 270° nipple |
| ABEG | M10X1-D1-L3-90° | design | | M10x1 thread, can be relubricated, 3-lip seal, 90° nipple |
| ABEG | M2 | design | | motor quality - duplicate - |
| ABEG | MA | cage | | brass cage guided on outer ring |
| ABEG | MAS | cage | | brass cage guided on outer ring, lubrication groove |
| ABEG | MB | cage | | brass cage guided on inner ring |
| ABEG | MB-E | cage | design | brass cage, reinforced |
| ABEG | MB-W33 | cage | | brass cage, can be relubricated |
| ABEG | MO222 | lubricant | | Mobil XHP222 grease |
| ABEG | MP | tolerance | | rail precision, medium accuracy |
| ABEG | MP-0 | tolerance | | medium precision |
| ABEG | MP-1 | tolerance | | medium precision, low pre-tensioning |
| ABEG | MP-2 | tolerance | | medium precision, medium pre-tensioning |
| ABEG | MP-UA | cage | tolerance | solid brass cage, universal design, with axial play |
| ABEG | MP-UL | cage | tolerance | solid brass cage, universal design, low pre-tensioning |
| ABEG | MP-UM | cage | tolerance | solid brass cage, universal design, medium pre-tensioning |
| ABEG | MP-UO | cage | tolerance | solid brass cage, universal design, free of play |
| ABEG | MP-US | cage | tolerance | solid brass cage, universal design, high pre-tensioning |
| ABEG | MPA | cage | | window cage, guided on outer ring |
| ABEG | N_1 | lubricant | | food-grade grease |
| ABEG | N2MA | design | | brass cage guided on outer ring, retaining grooves offset 180° |
| ABEG | N2MPA | design | | brass cage guided on outer ring, retaining grooves offset 180° |
| ABEG | N3 | lubricant | | Unirex N3 grease |
| ABEG | NB52 | lubricant | | Isoflex Topas NB52 grease |
| ABEG | NBU-8EP | lubricant | | Straburags NBU 8 EP |
| ABEG | NBU12 | lubricant | | Klüber Straburags NBU 12 grease |
| ABEG | NDG | design | | cylindrical outer ring with groove, without ring |
| ABEG | NP | tolerance | | rail precision, normal accuracy |
| ABEG | NP-0 | tolerance | | normal precision, 10 µm play |
| ABEG | NP-0-C | tolerance | | normal precision, 10 µm play - C sleeve |
| ABEG | NP-0-E2 | tolerance | | normal precision, 10 µm play - lubricant tank |
| ABEG | NP-1 | tolerance | | normal precision, low pre-tensioning |
| ABEG | NP-2 | tolerance | | normal precision, medium pre-tension |
| ABEG | NSL | seal | | double-lip seal on one side |
| ABEG | NX | material | | chemically hardened stainless steel design |
| ABEG | OE | design | | without groove |
| ABEG | ÖL | lubricant | | oiled bearing |
| ABEG | OR | design | | without lubrication groove |
| ABEG | OS | design | | greased for life, without lubrication hole |
| ABEG | P2 | tolerance | | tolerance class P2 |
| ABEG | P4 | tolerance | | tolerance class P4 |
| ABEG | P5 | tolerance | | tolerance class P5 |
| ABEG | P5-SRL | tolerance | lubricant | tolerance class P5, Multitemp SRL |
| ABEG | P53-15%GHY72 | tolerance | lubricant | tolerance class P5, C3 bearing clearance, 15% GHY72 grease |
| ABEG | P6 | tolerance | | tolerance class P6 |
| ABEG | P6-20%-GHY72 | tolerance | lubricant | tolerance class P6, 20% Klueber GHY 72 -40~180°C |
| ABEG | P6-20%-SRL | tolerance | lubricant | tolerance class P6, 20% SRL Multemp |
| ABEG | P6-SRL | tolerance | lubricant | tolerance class P6, Multitemp SRL |
| ABEG | P62 | tolerance | | tolerance class P6, C2 bearing clearance |
| ABEG | P62-SRL | tolerance | lubricant | tolerance class P6, C2 bearing clearance |
| ABEG | P63 | tolerance | | tolerance class P6, C3 bearing clearance |
| ABEG | PB | material | | lead-containing design |
| ABEG | PD2 | lubricant | | Castrol Longtime PD2 |
| ABEG | PE | tolerance | | extended tolerances |
| ABEG | PH | coating | | phosphatized |
| ABEG | PR | design | | shaft block for ALUSTAR profiles |
| ABEG | PS2 | lubricant | | Kyodo Yushi PS2 cold grease |
| ABEG | QCL7A | design | | SKF restricted tolerances -old- |
| ABEG | R200 | design | | radius 200, spherical (LR-201-NPPU) |
| ABEG | R30 | design | | radius 30, spherical (LR-5205-KDDU) |
| ABEG | REV10-D1 | design | | dimensions according to 2010 audit, with lubrication hole |
| ABEG | REV10-OS | design | | dimensions according to 2010 audit, without lubrication hole |
| ABEG | RLO | design | | little play |
| ABEG | RLQ2 | lubricant | | Shell Alvania RLQ2 grease |
| ABEG | RR | coating | | protected against rust by special coating (only INA) |
| ABEG | RU | seal | | double-lip seal on one side |
| ABEG | RW | seal | | low-friction seal on one side |
| ABEG | RZ | seal | | non-contact seal on one side |
| ABEG | S | design | | with lubrication hole |
| ABEG | S0-20%-SRI-2 | material | lubricant | thermally stabilized up to 150 °C, 20% SRI-2 Chevron |
| ABEG | S0-20%-SRL | material | lubricant | thermally stabilized up to 150 °C, 20% SRL Multemp |
| ABEG | S0-SRI-2 | material | lubricant | thermally stabilized up to 150 °C, SRI-2 Chevron |
| ABEG | S1 | material | | thermally stabilized up to 200 °C |
| ABEG | S1-LME552 | material | lubricant | thermally stabilized up to 200 °C, Thermoflex LME 552 |
| ABEG | S2 | material | | thermally stabilized up to 250 °C |
| ABEG | S2-SF | material | lubricant | thermally stabilized up to 250 °C/special grease |
| ABEG | S3 | material | | thermally stabilized up to 300 °C |
| ABEG | S4 | material | | thermally stabilized up to 350 °C |
| ABEG | SA | design | | special design/drawing part |
| ABEG | SAE8660MOD | material | | spring steel material |
| ABEG | SF | lubricant | | special grease |
| ABEG | SF-D1 | lubricant | | special grease, can be relubricated |
| ABEG | SF-KU | lubricant | Cage | special grease, plastic cage |
| ABEG | SK | design | | hexagonal |
| ABEG | SL2 | lubricant | | Klueber Alltime SL2, -50° bis 150°, Leichtlauf |
| ABEG | SLX7 | design | | dust lip, corrugated outer sheath |
| ABEG | SM02 | lubricant | | SM02 grease |
| ABEG | SM03 | lubricant | | SM03 grease |
| ABEG | SP | tolerance | | rail precision, super precision |
| ABEG | SP-1 | tolerance | | super precision, low pre-tensioning |
| ABEG | SP-2 | tolerance | | super precision, medium pre-tension |
| ABEG | SP-3 | tolerance | | super precision, high pre-tensioning |
| ABEG | SPLIT | design | | thrust bearing parts packed separately |
| ABEG | SRI | lubricant | | Chevron SRI -30~175°C grease |
| ABEG | SRI-2 | lubricant | | Chevron SRI -2 grease |
| ABEG | SRI-2-RAL5015 | lubricant | material | Chevron SRI -2 grease, RAL5015 sky blue seal |
| ABEG | SRL | lubricant | | Multemp SRL grease |
| ABEG | SS | material | | stainless steel |
| ABEG | ST | material | | steel cage |
| ABEG | ST-E | material | design | steel cage, reinforced |
| ABEG | ST-E-W33 | material | design | steel cage, reinforced design, can be relubricated |
| ABEG | ST-G | material | design | steel cage, cage closed on both sides |
| ABEG | ST-OS | material | design | steel cage, without lubrication hole |
| ABEG | ST-SF | material | lubricant | steel cage, special grease |
| ABEG | ST-UO | material | tolerance | steel cage, universal design, free of play |
| ABEG | ST-W33 | material | design | steel cage, can be relubricated |
| ABEG | ST-W33-VA405 | material | design | vibrating screen bearing |
| ABEG | SUPER_N | lubricant | | Raremax Super N |
| ABEG | TA | seal | | with V ring seal |
| ABEG | TC | seal | | with felt seals |
| ABEG | TFS | material | seal | Teflon seal |
| ABEG | TG | seal | | with double-lip seal |
| ABEG | TN | cage | | plastic cage |
| ABEG | TN-1AS | cage | accessories | plastic cage, incl. 1 AS washer |
| ABEG | TN-2AS | cage | accessories | plastic cage, incl. 2 AS washers |
| ABEG | TN-G5 | cage | tolerance | G5 needle sorting, plastic cage |
| ABEG | TN-OS | cage | | plastic cage, cannot be relubricated |
| ABEG | TN9 | cage | | plastic cage |
| ABEG | TNG | cage | | plastic cage |
| ABEG | TP2S-UL | cage | design | phenol resin cage, P2S, low pre-tensioning |
| ABEG | TP4-UL | cage | design | phenol resin cage, P4, low pre-tensioning |
| ABEG | TP4S | cage | design | phenol resin cage, P4S tolerance |
| ABEG | TP4S-DUL | cage | design | phenol resin cage, P4S, low pre-tensioning/set |
| ABEG | TP4S-DUL-NBU15 | cage | design | phenol resin cage, P4S, low pre-tensioning/set |
| ABEG | TP4S-UL | cage | design | phenol resin cage, P4S, low pre-tensioning |
| ABEG | TP4S-UM | cage | design | phenol resin cage, P4S, medium pre-tensioning |
| ABEG | TP4S-UO | cage | design | phenol resin cage, P4S, without axial play |
| ABEG | TP4S-US | cage | design | phenol resin cage, P4S, high pre-tensioning |
| ABEG | TP5-UO | cage | design | phenol resin cage, P5, without axial play |
| ABEG | TPA-P4-UL | cage | design | textile laminated phenolic resin cage, P4, low pre-tensioning |
| ABEG | TS | seal | | labyrinth seal |
| ABEG | TV | cage | | plastic cage |
| ABEG | TVH | cage | | plastic cage |
| ABEG | TVH-P4 | cage | tolerance | plastic cage, tolerance P4 |
| ABEG | TVP | cage | | plastic cage |
| ABEG | TVP-P5 | cage | tolerance | plastic cage, tolerance P5 |
| ABEG | TVP-P5-UA | cage | tolerance | plastic cage, tolerance P5, with axial play |
| ABEG | TVP-P5-UL | cage | tolerance | plastic cage, tolerance P5, low pre-tensioning |
| ABEG | TVP-P5-UM | cage | tolerance | plastic cage, tolerance P5, medium pre-tensioning |
| ABEG | TVP-P5-UO | cage | tolerance | plastic cage, tolerance P5, free of play |
| ABEG | TVP-P5-US | cage | tolerance | plastic cage, tolerance P5, high pre-tensioning |
| ABEG | TVP-P6 | cage | tolerance | plastic cage, tolerance P6 |
| ABEG | TVP-UA | cage | tolerance | plastic cage, universal design, with axial play |
| ABEG | TVP-UL | cage | tolerance | plastic cage, universal design, low pre-tensioning |
| ABEG | TVP-UM | cage | tolerance | plastic cage, universal design, medium pre-tensioning |
| ABEG | TVP-UO | cage | tolerance | plastic cage, free of play |
| ABEG | TVP-US | cage | tolerance | plastic cage, universal design, high pre-tensioning |
| ABEG | TVP4S-DUL | cage | tolerance | polyamide cage, P4S, low pre-tensioning, duplex |
| ABEG | TVP4S-DUL-NBU15 | cage | lubricant | polyamide cage, P4S, low pre-tensioning, duplex, greased |
| ABEG | TVP4S-DUM | cage | lubricant | polyamide cage, P4S, medium pre-tensioning, duplex |
| ABEG | TVP4S-UL | cage | tolerance | polyamide cage, P4S, low pre-tensioning |
| ABEG | UB-OS | design | | UB design, cannot be relubricated |
| ABEG | UP | tolerance | | rail precision, ultra precision |
| ABEG | UP-1 | tolerance | | ultra precision, low pre-tensioning |
| ABEG | UP-2 | tolerance | | ultra precision, medium pre-tension |
| ABEG | UP-3 | tolerance | | ultra precision, high pre-tensioning |
| ABEG | UU | seal | | KBC: non-contact seal on both sides |
| ABEG | UU-C0 | seal | tolerance | seal on both sides, positive play (pre-tensioning) |
| ABEG | V | seal | | non-contact seal on one side |
| ABEG | V4A | material | | AISI630 stainless steel |
| ABEG | VA405 | design | | bearings for vibrating machines |
| ABEG | VA406 | packaging | | bearings for vibrating machines with PTFE coating |
| ABEG | VCI | packaging | | technically dry, in VCI paper |
| ABEG | VCI-G2 | packaging | tolerance | technically dry, in VCI paper, G2 sorting |
| ABEG | VCI-RLQ2 | packaging | lubricant | technically dry, in VCI paper + RLQ2 grease |
| ABEG | VCI-SF | packaging | lubricant | technically dry, in VCI paper + special grease |
| ABEG | VSP | tolerance | | pre-tensioned |
| ABEG | VT200 | seal | | bearing with seal temperature-resistant up to 200 °C |
| ABEG | VT250 | seal | | bearing with seal temperature-resistant up to 250 °C |
| ABEG | VV | seal | | non-contact seal on both sides |
| ABEG | W | cage | | steel crown cage |
| ABEG | W33 | design | | can be relubricated (no specification of cage design.) |
| ABEG | WBN2 | lubricant | | Rhenus WBN2 (previously: Noran HTK2) |
| ABEG | WE | design | | self-aligning |
| ABEG | WE-D1 | design | | self-aligning, can be relubricated |
| ABEG | WE-SF | design | | self-aligning, with special grease |
| ABEG | WS | design | | changed installation height |
| ABEG | X | design | | changed internal design |
| ABEG | X7 | design | | corrugated outer sheath |
| ABEG | XA | design | | changed internal design |
| ABEG | XCLEAN | design | | from our eXtreme series, with performance boosted |
| ABEG | XFORCE | design | | from our eXtreme series, with performance boosted |
| ABEG | XJ | design | | changed internal design |
| ABEG | XSPEED | design | | from our eXtreme series, with performance boosted |
| ABEG | XTEMP | design | | from our eXtreme series, with performance boosted |
| ABEG | XTREME | design | | optimized design for extreme conditions |
| ABEG | Y | cage | | brass cage |
| ABEG | Y-SF | cage | | brass cage, special grease |
| ABEG | Y1 | coating | | coated with corrosion protection |
| ABEG | ZK | coating | | galvanized, DIN50979 Fe/Zn8/Cn/T0. CrVI free |
| ABEG | ZK-BCR | coating | | galvanized and blue chromate plated (CrVI free) |
| ABEG | ZK-DP | coating | | galvanized and thick film passivated (CrVI free) |
| ABEG | ZNCRIII | coating | | zinc + trivalent chrome treatment |
| ABEG | ZNFE | coating | | protected against rust by special coating (zinc/iron) |
| ABEG | ZNNI | coating | | protected against rust by special coating (zinc/nickel) |
| ABEG | ZNNI-OS | coating | | greased for life, special coating (zinc/nickel) |
| ABEG | ZW | design | | double-row |